中文 / EN
咨询电话:13889831425
  • 不锈钢试管架
  • 大号试管架
  • 消化管架
  • 消煮管架
  • 定氮管架
降温系统恒温平台SLP ◆ 冷却和加热系统模块平台◆ 模块和实验室组织>样品冷却器>取样冷却器

商品名称:降温系统恒温平台SLP ◆ 冷却和加热系统模块平台◆  模块和实验室组织>样品冷却器>取样冷却器

● CAT no. DYX - 252

● 恒温平台工作温度 -350℃ 至 +500℃

恒温平台迅速适应温度 -196℃ 至 +100℃

● 高效率传导冷源

● 推荐用液态氮确保所有的样品受到保护
● 不受环境空气攻击,并保持在-140°范围内,以-150°C的范围内。
● DyCool ThermalTray SLP
● Slim low profile platform recommended for liquid nitrogen
● the samples are protected from ambient air attack and kept within the -140° to -150°C range while on the bench top.

● WxLxH:  28.0×14.0×3.2cm 
● 重量: 3.65kg   

※  一般冷冻温度在-50℃和-80℃。

※  避免冰晶形成的细胞壁和破损,冻干的冷冻步骤中迅速地进行。

※  模块化为各种生物标本。

※  冷冻干燥过程中保护您的样品的最佳方式是快速和标准化的方式冻结它们。

★ 本產品的辅助产品为  冰桶、冰盒/9Lpan


1686095291528162.png


1685705314866622.jpg

1685705314919895.jpg

1685705338408385.png



商品信息

DyThermalTray 恆溫平臺

■ 本產品为鍛造太空鋁加工中心精製而成,坚实牢固,国际通用型,已申請中國專利。

■ 本產品爲設計精密,溫度傳導極佳的恆溫平臺、恆溫盤和恆溫槽樣品模塊。設計穩定爲樣品加工、解剖提供堅固基礎。通過與水,液氮或其他溫度源的直接接觸,最大限度地降低樣品污染的風險。

■ 本產品通過直接接觸冷源或熱源調節溫度。模塊放置在-196℃至100℃冷源或熱源上,通過快速傳導冷源或熱源溫度,保持溫度一致。

■ 所有產品都受過陽極氧化和防腐處理。可用溶劑,含水洗滌劑,醇類和酸/鹼殺病毒劑(例如衛可)清洗。在使用清洗溶液後,需用乾淨的水沖洗。避免在過高或過低PH溶液中長時間浸泡(超過一小時),可在高達250°C下,高溫高壓消毒。

■ 太空鋁材質

■ 東易鑫品牌中國製造

特性:

■ 太空鋁恆溫模塊由獲得專利的導熱合金材料組成,這種導熱合金材料可以將熱量從高溫區域傳導到低溫區域,直到兩個區域的熱量達到平衡。正是這種性能,這種材料便成為瓶子、試管和導管的最佳材料理想的持有者。

 注意事項:在製冷或加熱時,金屬表面直接接觸皮膚會引起嚴重燒傷。皮膚切勿直接接觸冷凍或加熱的金屬表面。在處理乾冰、液氮或其他熱源上的模塊時,務必使用絕緣防護手套。當使用液氮時,請遵守所有實驗室安全程序。

DyThermalTray Platform

■The product is made by aluminum alloy. It’s strong and firm international generic type, which has applied for patents in China.

■ Precision-engineered for optimal thermal contact between DyCool ThermalTray and DyCoolRack and DyCoolSink sample modules. Stable design provides solid, sturdy base of processing or dissecting samples. Minimizes risk of sample contamination by eliminating direct contact with water, LN2 or other temperature sources.

■ The product is designed to regulate temperature through direct contact with a cooling, freezing, or heating source. A module placed on a cooling or heating source(-196℃ through >100℃) will rapidly adapt to the source temperature and keep consistently at the same temperature.

■ All thermo-conductive modules are anodized and corrosion resistant. They may be cleaned with solvents, aqueous detergents, alcohols and acid/base viricide (such as Virkon S) solutions. Rinse with clear water after using cleaning solutions. Avoid soaking for extended periods (more than one hour) in low or high pH solutions. The modules are autoclavable and can be heat sterilized up to 250˚C.

■ Material: Aluminum alloy

■ Dongyixin Brand, Made in China

Features:

■The modules are made of a patented thermo-conductive alloy material that transfers heat from higher temperature regions to lower temperature regions until equilibrium is reached, thus making them ideal holders for your the vials and tubes.

 CAUTION: Direct skin contact with metal surfaces at cryogenic temperatures or when heated can cause serious burns. Never touch frozen or heated metal surfaces with bare skin. Always use insulated protective gloves when handling modules in dry ice, liquid nitrogen or any heat source. Follow all standard laboratory safety procedures when using LN2.

SLP-LP-HP【鑫】.png


在线客服