DYCoolSink HCD 培养皿托盘

■ 本產品为鍛造太空鋁加工中心精製而成，坚实牢固，国际通用型，已申請中國專利。

■ 本產品在處理組織時，恆溫平台 DYCoolSink HCD可以使組織在無菌的狀況下且在預定的溫度下在生物安全櫃內操作。

■ 本產品在分離組織的過程中，像是癌症幹細胞的分離，或是組織分離後上流式細胞儀分析，需要物理性與的分解與酵素作用才能將組織分解成單一細胞。在此狀況下，恆溫平台 DYCoolSink HCD可以固定細胞培養皿，提供快速的溫度調節以即在生物安全櫃內操作的可能。

■ 所有產品都受過陽極氧化和防腐處理。可用溶劑，含水洗滌劑，醇類和酸/鹼殺病毒劑（例如衛可）清洗。在使用清洗溶液後，需用乾淨的水沖洗。避免在過高或過低PH溶液中長時間浸泡（超過一小時），可在高達250°C下，高溫高壓消毒。

■ 太空鋁材質

■ 東易鑫品牌中國製造

特性：

■ 恆溫平台 DYCoolSink HCD以也以應用在很多其他不同的應用上，像是提供分解細胞時所需要的溫度，作soft agar時需要的快速降溫等等。

■ 恆溫平台 DYCoolSink HCD上的鎖定凹槽可以很容易的使用雙手操作細胞實驗，其橡膠腳座可以使得恆溫平台 DYCoolSink HCD在生物安全櫃內穩定操作，又可以在恆溫平台 DYCoolSink HCD需要接觸溫度原的時候或是高壓滅菌時快速移除。

 注意事項：在製冷或加熱時，金屬表面直接接觸皮膚會引起嚴重燒傷。皮膚切勿直接接觸冷凍或加熱的金屬表面。在處理乾冰、液氮或其他熱源上的模塊時，務必使用絕緣防護手套。當使用液氮時，請遵守所有實驗室安全程序。

DycoolSink Petri Dish Tray

■The product is made by aluminum alloy. It’s strong and firm international generic type, which has applied for patents in China.

■ When this product is used to process tissues, the thermostatic platform DYCoolSink HCD can enable tissues to be operated in a biosafety cabinet under aseptic conditions and at a predetermined temperature.

■  In the process of tissue separation, such as the separation of cancer stem cells, or the upflow cytometer analysis after tissue separation, this product requires physical and enzymatic decomposition to decompose the tissue into a single cell. In this case, the thermostatic platform DYCoolSink HCD can fix the cell culture dish, providing rapid temperature regulation, that is, the possibility of operating in the biosafety cabinet.

■ All thermo-conductive modules are anodized and corrosion resistant. They may be cleaned with solvents, aqueous detergents, alcohols and acid/base viricide (such as Virkon S) solutions. Rinse with clear water after using cleaning solutions. Avoid soaking for extended periods (more than one hour) in low or high pH solutions. The modules are autoclavable and can be heat sterilized up to 250˚C.

■ Material: Aluminum alloy

■ Dongyixin Brand,Made in China

Features:

■  The thermostatic platform DYCoolSink HCD can also be used in many other different applications, such as providing the temperature required for cell decomposition, fast cooling required for soft agar, etc.

■ The locking groove on the thermostatic platform DYCoolSink HCD can easily operate the cell experiment with both hands. Its rubber foot seat can make the thermostatic platform DYCoolSink HCD operate stably in the biosafety cabinet, and can also be quickly removed when the thermostatic platform DYCoolSink HCD needs to contact the temperature source or when it is autoclaved.

 CAUTION: Direct skin contact with metal surfaces at cryogenic temperatures or when heated can cause serious burns. Never touch frozen or heated metal surfaces with bare skin. Always use insulated protective gloves when handling modules in dry ice, liquid nitrogen or any heat source. Follow all standard laboratory safety procedures when using LN2.